|
Internal diameter of the combustor |
100mm |
|
Height of the combustor |
450mm |
|
Pipe hole diameter of the long pole igniter trailing end diameter |
2±1mm |
|
Flowmeter |
160~1600L/Hadjustable |
|
Precision of the pressuregauge |
level 2.5 |
|
Resolution of the pressure gauge |
0.01Mpa |
|
Resolution of the Oxygen concentrate indicator |
0.1% |
|
Oxygen sensor |
imported from Germany with high precision |
|
Gas source |
the GB3863 specified oxygen, the GB3864 specified nitrogen |
|
Experiment environment temperature, humidity |
10~35℃,45-75% |
|
Input pressure |
0.2-0.3Mpa |
|
Working pressure |
0.05-0.15Mpa |
|
Sample type |
self-supporting materials and non-self- supporting materials |
|
Overall dimensions |
700mm(W)×400mm(D)×600mm(H) |
|
Power supply |
AC220V, 50/60Hz 1A |
|
Air source source |
oxygen, nitrogen( prepared by users) |
The limiting oxygen index (LOI) tester is a measure of the flammability of a material in the presence of oxygen. The limiting oxygen index tester is a device used to measure the LOI of a material by measuring the concentration of oxygen in the surrounding air that is required to support combustion of the material.
Prices for these devices can vary depending on the manufacturer, model, and features. You may be able to get a more accurate price estimate by contacting manufacturers or suppliers of oxygen bomb calorimeters or by searching online marketplaces. It may also be helpful to compare prices from multiple sources to get a better understanding of the range of prices for these devices.
The radiant flooring panel apparatus consists of a radiant panel, a flooring sample holder, and a control unit. The radiant panel is a flat, rectangular panel that is heated by an electric element. The flooring sample holder is a metal frame that holds the flooring sample in place above the radiant panel. The control unit is used to control the temperature of the radiant panel and to measure the critical radiant flux and smoke production rate of the flooring material.
This machine is suitable for the flammability test of various wire and cable insulation coating materials, printed circuit board materials, IC insulators and other organic materials. During the test, the test piece is placed on the top of the flame, burned for 15 seconds, extinguished for 15 seconds, repeated After 5 times, the test piece is incinerated, and the burning, extinguishing time and repetition times can be set, and the operation can be performed automatically.
Textile flammability is not a simple function, where the 'burning behaviour' of the material can be predicted under all circumstances. The subject is complex; and has resulted in the development of a wide spectrum of test methods, some of which are specific to particular end-uses.
According to GB/T17651.1~2 and IEC61034-1~2,the first parts of "test device" and second part of "test steps and requirements" for the determination of smoke density of cables or optical cables under specific conditions. The determination of smoke density is an important aspect of assessing the combustion characteristics of cable or cable, which is related to the evacuation of the personnel and the determination of the proximity of the fire extinguishing. This instrument is mainly used to determi...
This machine is suitable for the flammability test of various wire and cable insulation coating materials, printed circuit board materials, IC insulators and other organic materials. During the test, the test piece is placed on the top of the flame, burned for 15 seconds, extinguished for 15 seconds, repeated After 5 times, the test piece is incinerated, and the burning, extinguishing time and repetition times can be set, and the operation can be performed automatically.
